Truth Frequency Radio

Mar 18, 2021

The outside pool is a great place to relax. However, with the onset of cold weather, the bathing season ends. Another drawback of an outdoor swimming pool is the quick clogging with dust, dirt, leaves and other debris. Should you build a pool in a greenhouse on your dacha, the closed bowl is going to be protected from the harmful effects of the natural surroundings, and also the bathing season can be extended till the onset of frost.

Types of greenhouses to get a Pool

Traditionally organize on a garden plot pool at a freshwater greenhouse, however, the definition of the type of structure is not confined to the choice of covering material. From the massive amount of evaporation inside the building is constantly kept high levels of humidity. Not every substance will be suitable for the frame of the greenhouse. Wood will rust fast, and black metal is going to be destroyed by corrosion. To create a sword, stainless steel, aluminum, steel with a galvanized or plastic coating will be suitable.

The next important choice is your shape. Besides aesthetics, the rainwater for the pool must have the ability to withstand wind loads and also a massive amount of precipitation.

A beautiful and durable pool at the greenhouse in the cabin will get the following kinds:

Semicircular roof layout is easy to make, as polycarbonate is easy to bend. The arch is resistant to strong gusts of wind.

  • Dome. Greenhouses of this form are constructed over fonts that are round. The design isn’t simple to create and spends a lot of stuff.
  • One or two slopes. The simplest variant of a greenhouse for a ribbon with flat walls is simple to erect. On the other hand, the polycarbonate structure is weakly stable, fearful of strong winds and heavy precipitation. A version with a single slope is not acceptable for snowy regions.
  • Asymmetric form. Normally such greenhouses for swimming pools include a horizontal wall, passing into a big semicircle. The building of polycarbonate is difficult to create and demands proper positioning relative to the regular wind direction.
  • Deciding on the form of a polycarbonate shelter is dependent on the size of the pool, as well as how many people are counted on the resting place.

    According to the dimensions of the greenhouse comes in:

    • Low. The polycarbonate structure is made only to protect the water out of clogging, acting as a cover. Over a small pool more often put hinged tops, and massive fonts are outfitted with a sliding method.
    • High. Looking at photos of the pool at a polycarbonate greenhouse, you can confidently call the arrangement a real place of rest.

    Covered with polycarbonate high greenhouses outfitted with wide doors. Do doorways create slipping, with the top lift or hinged.

    • Polycarbonate and metallic profile for the framework are regarded as an environmentally friendly material. No compound aromas will accumulate inside the greenhouse from heating the construction below sunlight.
    • Polycarbonate cover for the pool is durable and lightweight. If necessary it could be transferred to another place.
    • Polycarbonate is resistant to harsh weather conditions.
    • Within the greenhouse that a greenhouse effect is created. It lowers the intensity of water flow from the pool, lessens the risk of reproduction of damaging microflora. The pool under the polycarbonate dome is protected from debris flushing.
    • Lightweight materials are suitable for self sustaining erection of the shield.
    • Polycarbonate pavilion has great light permeability. The material is affordable and can last up to ten years.
    • The pool below the shelter will always be clean. No rust will crumble from the stainless profile, and dirty polycarbonate can be easily wiped off with a rag.

    Of the disadvantages, there is 1 point. Polycarbonate is afraid of strong mechanical effects. To ensure that the shelter is not damaged by falling branches, the swimming pool isn’t placed under trees.

    Important: To pavilion for the pool for a very long time to function, to pay use polycarbonate sheets of thickness less than 8 mm.

    Choosing the type of fonts and setup procedures

    If we briefly consider how to make a pool at a greenhouse from polycarbonate, the work begins with the option of size. The fonts should be sufficient for all members of their family to visit in the same time. According to the sort of installment of the bowls are buried, partially embedded or set up on the surface. The latter kind may include a frame swimming in a greenhouse of polycarbonate or a small inflatable bowl. The most dependable is considered a totally buried font. From the dacha you can make a bowl under a dome of two 2 types:

    A reinforced concrete ribbon is poured directly inside the pit. At the bottom of the pit, a cushion of sand with crushed rock is pumped and a reinforcing mesh is laid. First, the base of the bowl has been poured in the mortar. After the concrete hardens, place the formwork for the pouring of the walls. The final bowl is coated with primer onto the exterior and tiled, painted or otherwise finished indoors.