Truth Frequency Radio


Mar 20, 2021

Rarely does anyone in the dacha build a funding shower made of brick or cinder block. Normally its use is limited to 3 summertime and then during the planting of their vegetable garden, in addition to harvesting. For such a brief period it is sufficient to construct a light cottage from some other sheet material. Not a poor option is really a shower to get dacha from polycarbonate with a living area, which isn’t tricky to design and make yourself. Why it is Much Better to select polycarbonate for lining the shower

Polycarbonate is not the only material to get a dacha shower. For this case with victory will match exactly the profiled sheeting or batten. Just today we decided to stop only with this gorgeous and durable material.

Let’s consider the advantage of utilizing polycarbonate for repainting the shower along with other similar substances:

  • If the advantages of polycarbonate have persuaded you, then let us proceed to the next stage of building a shower for dacha.
  • A Couple of important tips Concerning the development of the look of a country shower using a changing room

Even such a simple construction, as a shower out of polycarbonate for dacha requires the creation of this project. It’s not necessary to construct complex drawings, and also a simple scheme could be sketched out. Here you need to immediately decide for yourself exactly what you wish to construct a shower. Very fast you may earn a lightweight stall and only put it on the floor. More complicated in the manufacture of shower to the foundation with warm water heating, however such a design will probably last longer. Additionally, in a dacha shower you’ll have the ability to bathe in the cold.

So, we begin to independently create a project:

  • Structure of a dacha shower starts with determining its place. It is important to be aware that the tank ought to be constantly filled with water. Carrying it in Saved from afar is uncomfortable and difficult. It is much better to place the shower stall close to the water intake.
  • If the dacha shower will bathe a whole lot of individuals, it should be placed as near as possible into this cesspool or septic tank. Close installation dacha shower near the cesspool will definitely save laying sewer pipes, however it is desirable not to bring the stall closer into the accumulator of impurities nearer than 3 m. On warm days, bad smells from the sewage system will penetrate the shower, making an unpleasant air while bathing.
  • The water in the tank of a summer shower is warmed from the sun. The stall must be placed in the sunniest area, where there is not any shade in the trees and tall constructions.
  • In the shower stall and changing room from polycarbonate should provide lighting, which means that you may bathe at night. Only it is crucial to consider that the lights should have a high degree of protection from water. It is optimal to put shower cottages on the rear of the home. Here are closest to this sewer, water source and not far to pull on the electrical cable for lighting.
  • Determined by the place of the place of the summer shower, begin to generate a plot of the cabin itself out of polycarbonate. Initially it was determined that the garden shower will probably be using all the living area. In this case, the width of this layout will turn out 1,6 m, and the length of 1,6 m. When the owners are overweight individuals, then the diameter of the shower cubicle with a locker area is much better to increase to 1.2 m.
  • within the shower booth provide separation. Separate the dressing room threshold, as well as tarpaulin curtain. They won’t allow the water to wet clothes and shoes.
  • If desirable, the dressing room can be coordinated in the anteroom. Then, near the shower enclosure individually install extra racks, to that fix sheets of polycarbonate. The dimensions of the pre-bath depends on the preferences of the owner. Occasionally cottagers build bigger pre-baths where, as well as the dressing room, equip a recreation room. Indoors there are seats and a desk.
  • The complete height of the shower cabin from floor to roof is at least 2.2 m. along with the tank it can attain 2.5 m, and even greater. The elevation inside the shower stall will probably be lower. Part of this space below will take a wooden menu, and the shirt will probably hang on out a watering can with https://shtorymax.ru/ a tap less than 15 cm.

Given all these nuances, on a bit of paper sketches the scheme of the shower with a polycarbonate dressing area, and then proceed to its construction.

MORE NEWS BY NEWS >>